During winters everyone needs to get warm by some heating appliance. The gas fireplaces can provide pleasant warmth and have many advantages over wood-burning fireplaces. However, there are some drawbacks of ordinary gas fireplaces are also there. Like, simple gas fireplaces get the air from inside of the room for the combustion, and after burning, most of the heat leaves home through vents.
On the other hand, Direct vent gas fireplaces work the opposite. They got a double pipe chamber for ventilation mechanism. This kind of fire burners sucks the air from outside of the house using a double pipe’s outer chamber. And the inner chamber of the ventilation pipe is used to exhaust the excessive fumes. So, this incoming and outgoing air is performed simultaneously. Moreover, the combustion happens behind a glass which provides extra safety.
Top Rated Best Direct Vent Gas Fireplaces
- Majestic Jade Direct-Vent Gas Fireplace.
- Empire Tahoe Deluxe Direct-Vent Fireplace
- Empire Comfort Premium Direct-Vent Fireplace.
- Napoleon Vector LHD45NSB Direct-Vent Fireplace.
- BL-936 Langley Builder’s Linear Direct-vent Fireplace.
- Napoleon Ascent 35 Direct-Vent Fireplace.
- Napoleon GT8N Torch Direct-Vent Fireplace.
Majestic Jade Direct-Vent Gas Fireplace
Are you searching for a linear direct-vent fireplace? If yes, then Majestic Jade can be a good option. This product is manufactured by Majestic, who is famous for developing more reliable gas and burning fireplaces. That’s why this fireplace comes at the top of the list of best direct vent gas fireplaces. Its moderate design with compact styles can enhance the beauty of your home in a significant way. Direct-vent technology used in this fireplace can be life savior as it doesn’t suck air from the house for the combustion process.
Furthermore, this product ignites up using Intellifire system that can make fire flames in minimum time. It can produce more than 23,000 BTU of heat by burning much lesser gas. Moreover, it can give warmness to 900 sq ft. Well, if we talk about efficiency than this product has an enormous percentage (65%) in terms of efficiency. The unit is 17 inches in terms of depth and 33 inches of height.
If we talk about design, It usually comes in a linear model with front glass and stainless steel black coloured body. Moreover, it comes with a brown Fillmore mantel shelf. The flames produced can be realistic in look, and its colour depends on the fuel you are using for the burning. This product can run on Natural gas as well as Propane gas. So, the user has some options for fuel. Also, the Majestic fireplace has multi colours LEDs to increase its beauty.
- Linear Design with hard front glass.
- Remote Control Ignition.
- Up to 23,000 BTU capacity.
- Internal LED’s to improve beauty.
- No cons.
Empire Tahoe Deluxe Direct-Vent Fireplace
This Deluxe fireplace works on the direct-vent mechanism and comes at number two in our list of best direct vent gas fireplaces. This product has a brilliant percentage of efficiency, which is 83-85%. Moreover, it can generate 20,000 BTU which is again really amazing. It’s compact and elegant design gives you the flexibility to install this product where ever you want as it is only 16- inches. You will need a 17-3/4 area to install the fireplace.
The front side of the Empire Tahoe is 36”, and it comes with the sealed glass which can provide a user with some extra safety. It comes with an intake that is present below the fire-burning place and a blower which is on the upper part. Additional to this, Deluxe direct-vent fireplace doesn’t emit any kind of dangerous fumes. All the extra gases go out by its ventilation system.
As far as design is concerned, Deluxe comes in various textures of the back walls in the fireplace. It usually consists of a brick styled wall, which while burning gives an ancient look. So the beauty of the living place gets enhanced by the fireplace. It produces natural fire flames due to the tube burner came in this series. Due to the size, This product can be installed easily so, servicing and installation will not cause much money. Delux usually comes with two kinds of decorative Louvers. And three types of front doors are also an option to buy. The Interior has some decorative options too.
Empire Comfort Premium Direct-Vent Fireplace
This is a premium product by Empire company. There are multiple sizes available for this product. But, the most common size is 37.62 inches. Also, the product weighs almost 138 pounds. It also has a much reliable efficiency of nearly 84%, which can produce 26,000 BTU. It runs on natural gas and produces stylish flames which seem to be amazing in looks. And can be installed in an old fireplace. So if you have some old wood-burning fireplace and that has the same dimensions as required by this gas fireplace, then you can fix quickly this as gas fireplace insert.
Furthermore, the essential aspect of this product is that this comes with blower, whose speed can be adjusted quickly. It provides the user flexibility to control the air. Moreover, this product consists of temperature switches to manage and maintain the temperature generated by the fireplace.
The whole fireplace is covered by the ceramic fibre coating and has tempered glass at the front. Burning space has umber bricks styled background to provide beauty. Its doors are decored, and the frame is made up of excellent material. Its design is so elegant and ancient that it can increase the beauty of the living area.
Napoleon Vector LHD45NSB Direct Vent Fireplace
Napoleon Vector is a fantastic product with a sleek and beautiful design. And that comes with a lifetime warranty. Moreover, this produces 30,000 BTU with minimum fuel of natural gas and weighs almost 179 pounds. It consists of luxurious fire burning place with LEDs to control the ambience of the fireplace. These LEDs can be controlled with the app and Bluetooth.
This comes with multiple colours of fire flames. These flames can be controlled by app too. Fire glow can be minimized in the night or when you are not in the room. By doing this, fuel consumption can be reduced. Furthermore, user can customize the fire by placing the mineral rocks, nickel stix, beachy shire and ember.
User doesn’t have to get in contact with the fireplace directly, as it runs on the smart mobile application. So every task can be done from a safe distance. Moreover, it’s ignition is fully electric and automated, so it’s straightforward to start the fire and enjoy the cozy effect produced by it. This product comes at number four in our list of 7 best direct vent gas fireplaces.
- Electric Ignition.
- App controller to control the LEDs and flames.
- Sleek and Linear Design.
- More energy efficient.
- Night flames control.
- Direct-Vent ventilation system.
- Installation can be tricky due to electric components.
- LEDs are hard to replace.
BL-936 Langley Builder’s Linear Direct-vent Fireplace.
This Linear and beautifully designed direct-vent fireplace can be a better option for your living space. It is manufactured by Sierra flame. Its compact design makes this product sleekest fireplace in the market. So, the thinness of this fireplace makes the installation job easy.
This little fireplace has extraordinary power to generate more than 14,500 BTU by burning minimum natural gas. The direct-vent ventilation system makes this product much safe and reliable as well as it is energy savior. It consumes much lesser gas as compared to the other kind of fireplaces. Its ignition system is millivolt, or you can say it burns by a standing pilot. The use of a remote can start the ignition process.
If we talk about design aspects, it comes in linear design; Its frame is made up of stainless steel and can be in black color with front glass. The quality of glass is exceptionally reliable as that cant be shatter and a good absorber of heat. The glass is commonly known as Borosilicate glass.
- Direct-vent fireplace which can consume minimum fuel.
- Thin Design.
- Easy installation.
- Hard front glass.
- Stainless steel Body.
- Less coverage Area.
- Millivolt standing pilot ignition.
Napoleon Ascent 35 Direct-Vent Gas Fireplace
Are you a kind of person who loves classical interior? Well, Ascent 35 is the one that can be your top priority as it has a luxurious and traditional design. It consists of glowing ember interior and most realistic fire flames. Moreover, it got a hard glass on the front to keep you safe from the fire and supply consisting heat energy to a wide range.
This can produce heat about 26,000 BTU’s using propane as fuel. Height of Ascent 35 is 34.64 inches while the width is 35 inches. It comes with a lifetime warranty, so once you buy it, you won’t face any problem. Also, the following product got Phazer and beach fire logs to give the user flexibility to customize the fire. If we talk about the interior, it can be of five different types. So you can match the interior with the surroundings. Furthermore, it comes in multiple texture and colours of the frame.
User can get an option of E-fire controller, which runs on some phone app and provide the customer with more accessibility of flames and interior colours. The ignition system used in Napoleon is electronic, which ensure the safety of the people using this product.
- 26,000 of heating capacity.
- E-fire controller for controlling the fireplace through a mobile device.
- Classical design to enhance the beauty of living place.
- Lifetime warranty to ensure the quality of the product.
- Non-Linear design that can be hard to install.
Napoleon GT8N Torch Direct Vent Fireplace
Napoleon, a most reliable fireplace manufacturing company, made this product for a small area. It’s minimalistic, and compact design gives a modern look to the room. This little product with a direct-vent ventilation product can produce heat up to 6,000 BTU and comes on the last number of our best direct vent gas fireplaces list. It consists of a single flame that gives a much realistic look. Moreover, its compact size makes it easy to install anywhere you want.
Torch from napoleon runs on gas, and the user can save much fuel by electronic ignition as no standing pilot is required to illuminate the flames. The front is made up of safety glass, and reflective panels give it a modernized design pattern. It comes in two colors, i.e. white and metallic black. The product got 44 inches of height and 12 inches of width. Moreover, there is a control panel included in the fireplace to gain access to the LEDs and manage the flame.
- Compact Design, so can be installed in a small area.
- Electronic Ignition.
- Safety Glass.
- Lesser BTU.
- Single flame illuminator.
Table of Content
- Why Are Direct Vent Gas Fireplaces Different?
- How to Install a Direct Vent Gas Fireplace?
- Buyer’s Guide.
Why are Direct vent gas fireplaces different?
Gas fireplaces are the best alternative to wood-burning fireplaces. They use propane gas as fuel, which is way cheaper than wood. Moreover, wood cause more smoke and ash, which have to be cleaned three or four times a month. So, gas fireplaces are the best appliances to get heat.
Traditional gas fireplaces do their burning job using air from inside. Its vents are designed to remove all kinds of fumes and smoke, but by this method, heat also leaves the place. So an excessive amount of heat will be needed to get warmness. Furthermore, standard gas fireplaces use central air for combustion so, this can lower the oxygen level within the living place, and it can full of dangerous gases.
Well, on the other hand, Direct-vent fireplaces have a unique mechanism for the burning as well as ventilation process. They have double pipe chambers. The direct-vent gas fireplaces get the air from outside of the living place using an outer pipe. And uses this for the burning process and then extra gases leave the fireplace through the inner tube. All this combustion process takes place behind glass, so it keeps the house safe.
While installing the direct-vent fireplace, you don’t have to make some chimney in the roof of your living place. The direct-vent mechanism is unique so that we can make a hole in the wall behind the fireplace for the installation of the vent. So these fireplaces can be installed almost everywhere—for example, kitchen, bathroom, etc.
Less Fuel Consumption:
Fuel consumption is everyone’s top concern. Essential gas fireplaces burn more gas to warm a specific area. Because much of heat leave the area due to inadequate ventilation. On the contrary, direct-vent gas fireplaces use much lesser fuel as the minimum amount of heat went out through the vents.
Direct-Vent fireplaces provide warmness in a much safe way as compared to ordinary stoves. Because it has a hard glass with sealing so that no excessive amount of gas can pass through it, people will get pure heating without any hesitation. Moreover, glass provides the shield against the flames so, no one can get harm by them.
Direct-vent gas fireplaces provide some extra decoration to the living space in a much better way. As it usually doesn’t have any vent pipe that is running throughout the wall and goes to the roof. Moreover, burning flames can add some extra beauty to the room.
How to Install Direct-vent gas fireplace?
Installing some hardware in your living place may need some extra care. As, the bad installation will make your home look ugly. This kind of fireplaces is somehow easy to install as compared to another type of furnaces. Before starting the installation process, keep in mind these safety measures.
- Installation isn’t that much more comfortable it may require some specialized person. Try to install by yourself only if you are unable to find some qualified person.
- Inspect the fireplace after unboxing it. Look close for any damage or fault in your product because any error or leakage in the internal piping mechanism can cause an emergency.
- Make sure you don’t have any carpeting where you are going to install a Direct-vent gas fireplace because carpet or any other plastic material may get damaged due to its heat.
- If you are going to install in the children’s room, then, keep your eyes on the children if they are of early age.
- It shouldn’t be installed near some clothing stand or any flammable material.
- Keep all kinds of flammable liquids away from the gas fireplace.
- Proper ventilation is required, so install it by keeping that in mind.
- While installing don’t hit the product by some hammer or any kind of hard thing because it may damage the fireplace.
- Clean and remove all kinds of packings from the burning chamber of the fireplace.
- The fireplace should be installed on the wall or any non-combustible material so that it can be safe to use it for a long time.
- The fireplace must be installed on a flat surface.
- Remove the removable parts like the front grill and any decorative part of the fireplace that can be damaged during the installation process.
- Open the installation screws and prepare the fireplace for the installation.
- Make a frame for the fireplace within your wall or any specific area where you want to install it. Measurements should be perfect so that it can be fitted easily.
- Create an opening for the vent into the flat wall according to the size of the ventilation pipes.
- If The fireplace is massive attach some extra support for the stove so that it doesn’t fall from the frame.
- Insert vents into the hole and place the fireplace on the frame.
- Attach required nails to the fireplace.
- Connect gas pipes to the input of the gas fireplace. And connect electricity if required.
- Add the front grill and other stuff that came with the product.
- Make sure all the screws are tight, and installation is perfect.
- Run it for the first time and observe it carefully if there is any leakage or anything wrong with the fireplace.
- Make sure the ventilation mechanism is running with perfection and fix if any mistake or fault is there.
- Make sure the fireplace is correctly aligned on the wall.
- Keep the fireplace running for some time and observe it with full attention so that it can be safe to use that in the future.
Buyer’s Guide For Direct-vent gas fireplace
Are you going to buy a direct-vent gas fireplace? Don’t you have any knowledge about direct vented fireplaces? Well, we will answer all types of questions so you can easily decide on which factors you have to focus on while purchasing a fireplace.
Before buying you should know, there are following types of fireplaces available in the market named as, Direct-vent, B-vent and the final one is vent-free gas fireplaces. So you can take a look at the other two types as well.
Now, Direct-vent gas fireplaces are different from others in terms of the ventilation process. They are much safer and efficient in working. Moreover, minimum fuel consumption is the primary factor of these kinds of gas fireplaces. In this kind of fireplace, outer air (air from outside of the house) is used for the combustion process with the help of double pipes. Fire burns behind a glass sealed panel so that no extra smoke can enter the living place. Users can get more heat energy this way.
Venting systems :
Direct-vent gas fireplaces work in two kinds of ventilation systems: co-Linear venting and Co-axial venting system.
Co-Linear Venting :
This kind of venting system has dual pipes joined parallel. One tube is used to get air from outside of the fireplace, and this fresh air is then used for the combustion process. While another pipe is used for the exhaust of the dangerous or extra gases and fumes, fireplaces having these venting systems can be fit into a vertical chimney.
This kind of ventilation system works with two pipes structures in which a pipe with a smaller diameter is inserted in the other canal making two chambers. The outer chamber gets the air from outside and passes it to the firebox for the combustion process. On the other hand, the inner chamber works as the exhaust system. It throws out the extra gas fumes. So this venting system makes a loop by flowing of heat and getting cooler air from outside. This loop is named a convection loop.
Well, direct-vent gas fireplaces suck fresh air from the air chamber beneath the fireplace using some air sucker (which is optional), and this air pipe runs around the whole fireplace. The cold air due to the emission of heat from the fireplace gets hotter. The hot air then gets out from the blower present on the upper side of the fireplace. This way, no dangerous gases come into the room as the fireplace is properly sealed with the glass, which is hard to break. This glass provides some extra safety to the people using the direct-vent fireplace.
Some direct-vent gas fireplaces come with other fans that are used for blowing off the air within the pipes to make to heating mechanism work fast. Another option that comes with the fireplace is “dumb system” which usually suck the hot air from the fireplace and throw it in some other place, like separate room etc.
The buyer should check the glass quality either it can be tempered glass or other types of glass. Buyer can get ceramic glass coating as well if he spends some more money. Moreover, many qualities of metals are also present. User will have to decide the quality according to the price bracket.
According to your house or room where you want to install the fireplace, you should select the style. Like if you’re going to install the fireplace in a corner, there are multiple options of direct-vent fireplaces available in the market for the corners. Other styles can be Traditional, uni-sided, peninsula, and see-through. So you can have a good range of choices to make according to your preference.
So you can choose best fireplace from the list of best direct vent gas fireplaces to make your life more easier.
Direct-vent fireplaces are the most reliable and energy-efficient products. These kinds of fireplaces are easy to install and provides heat more reliably. Once, you install this kind of fireplace in your living area, and you don’t have to take tension about the extra and dangerous gases emitted by the combustion. As the air for the combustion process comes from out of the house, your central air remains hot and doesn’t get out of the exhaust system. So you should buy one from the best direct vent gas fireplaces.